Synchronous Pulleys Synchronous Pulley parts improve performance of motor-driven systems, increasing energy efficiency and decreasing maintenance costs. Synchronous drive enables adjustment of quickness and torque while connecting mechanically rotating parts; belts and pulleys make use of teeth to prevent slippage and undesired speed variations.
We offer three types of molded Synchronous Pulleys to meet up the low-cost needs in office automation devices and space-saving automated equipment
Synchronous Pulley S (sintered metal)
Synchronous Pulley D (aluminum, zinc die cast)
Synchronous Pulley MT (resin injection)
Lightweight and cost-effective use in office and automated equipment
Description: These are toothed pulleys that transmit power through positive engagement between your pulley teeth and sprocket grooves rather than friction used in standard belts. They utilize the tooth-grip basic principle where square, circular, or altered curvilinear pulley teeth mesh with correctly timed grooves on a drive for positive power transmission. As the pulley maintains positive engagement with the generating gear sprocket, power transmitting is smooth. For example, you do not have to get worried about the pulley slipping over just how it happens with standard belt drives. Furthermore, the thin cross portion of synchronous pulleys implies that less energy is required to operate it. On essential drives, using a synchronous pulley that does not require retensioning can help to improve your systems energy effectiveness. It also helps to decrease downtime. This will help to increase the overall production. Another advantage of using synchronous pulleys is definitely that they allow your system to operate under varying speeds, loads, and frequent starts. Nevertheless, it is important to make sure that your machine is certainly maintained at best condition for optimal performance. If installed correctly, you are certain of high mechanical effectiveness. Synchronous pulleys can deliver as high as 98% efficiency when installed properly. That is higher than the normal V-belts that provide the average efficiency of 96%. However, it is important to understand that synchronous pulleys aren’t ideal for all situations. If your production program was designed to utilize the standard belts, changing to synchronous pulleys may need some adjustments. As a result, you should think about engaging an expert before shifting to synchronous pulleys.
Ever-power’s SYNCHRONOUS pulleys are available for nearly every shaft diameter with regards to number of teeth as well regarding the profile chosen. They provide the option of non-positive or positive connections to the shaft using a clamping screw, keyway or conical clamping sleeve. MISUMI offers timing pulleys in aluminium or metal versions.
Ever-power offers a huge selection of various timing pulleys
From various materials: Aluminium, steel (1.1191/C45Electronic) and stainless steel (1.4301)
Different profile shapes (MXL, XL, L, H, GT, YU, T and AT)
With additional surface treatment: anodized, clear or black, chemically nickel-plated and burnished
In disc form ?Type A? and offset hub ?Form B?
With individually configurable shaft diameters for many sizes
Ever-power synchronous pulleys are produced from high quality iron (GG25), tolerate shock loading and achieve rim speeds of up to 40m/s. Obtainable with pilot bore fixings or using the Ever-power shaft fixing system for ultimate versatility.
Obtainable in both classical Timing and HTD profiles
Statically balanced to exceed grade G 6.3 (ISO 1940)
Rim boosts to no more than 40m/s
Blackened to lessen corrosion, acts as a perfect primer and eliminates the need for cleaning coating brokers prior to installation.
Precision machined grooves to protect and maximise belt existence whilst reducing noise
Ever-power mounting, for quick and simple installation
Particular designs and sizes available
aluminium, anodized Electronic6/EV1
Housing from profile 45 x 90
Sprocket galvanized steel, prepared for installation
optimum weight of the lifting door with paired insertion of the pulley, 34kg
weight = 0.340 kg/piece