We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 different branches. For far more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Substantial quality and low co EPT Q1332 Pipe Thread Lathe
The major efficiency attributes:
Massive spindle bore and double chuck enables clamp and approach massive diameter pipes
Integral machine bed adopts high energy iron to relize large rigidity and precision
Ultrasonic frequency quenched guide-ways are hard enough for good wear-resistance
Equiped with taper guidebook bar device this enables the device to approach taper threads.
Software:
Q1332 horizontal pipe threading lathe device is mostly utilized for turning the inside and exterior threads including metric and inch thread,as properly as getting all the typical functions of normal engine lathe such as processing the inner bore and finish encounter of shafts and disks,this equipment is outfitted with taper information bar device which permits this sequence to procedure taper thread.
This sequence lathe device is broadly used in industries including petroleum exploiting ,coal and minera EPT mining,chemical piping and geological prospecting,it is higher-efficiency gear in processing and fixing drilling pipe,drilling rod,thread coupling and so on.
Normal equipment:
Device submit,Tailstock,Chuck,taper guidebook bar,Lighting lamp,Coolant pump,Rear help bracket,Pad iron and so on.
Optional components:
Electronic readout,Chuck,Faceplate,Chasing dial,Middle relaxation,Sign mild,Protecting include(direct-screw,chuck,device put up),and Grinding attachment and so forth.
Item major specialized parameters:
| Specifications | Unit | Q1332 | |
| Capacity | Swing more than mattress | mm | 1000 |
| Swing more than cross slide | mm | 610 | |
| Length amongst facilities | mm | 1500/3000 | |
| Pipe threading variety | mm | Ø190-320 | |
| Width of bed way | mm | 550 | |
| Max.load potential | T | 5 | |
| Spindle | Spindle bore | mm | 330 |
| Spindle pace methods | – | 9 | |
| Spindle pace assortment | rpm | 7.5-280 | |
| Chuck size | mm | 780 | |
| Chuck type | – | 4-jaw electric powered | |
| Turret | Turret sort | – | Guide 4 place |
| Resource shank measurement | mm | 40×40 | |
| Turret journey | mm | 300 | |
| Carriage | X axis feed grade/selection | mm/r | 22/.02-.forty five |
| Z axis feed grade/variety | mm/r | 26/.07-1.33 | |
| X axis speedy traverse pace | mm/min | 1870 | |
| Z axis rapid traverse speed | mm/min | 3740 | |
| X axis journey | mm | 520 | |
| Z axis vacation | mm | 1300/2800 | |
| Tailstock | Tailstock quill diameter | mm | one hundred forty |
| Tailstock quill taper | – | MT#6 | |
| Tailstock quill travel | mm | 300 | |
| Motors | Main spindle motor | kW | 22 |
| Rapid traverse motor | kW | one.5 | |
| Coolant pump motor | kW | .125 | |
| Thread | Metric thread grade/selection | mm | 23/1-fifteen |
| Inch thread quality/variety | T.P.I. | 22/2-28 | |
| Dimensions | Width x Top | mm | 2100X1630 |
| Duration | mm | 4190/5690 | |
| Weight | Web fat | T | 11.5/13 |
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For a lot more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of authentic tools manufacturer’s (OEM) part quantities or emblems , e.g. CASE® and John Deere® are for reference reasons only and for indicating solution use and compatibility. Our business and the shown alternative components contained herein are not sponsored, accepted, or created by the OEM.
