DUMP TRAILER Power UNIT-DOUBLE ACTING
This electrical power unit has a electrical power up power down circuit with load holding on the two A & B ports. A pressure compensatred flow management could be extra to circuit to regulate the decent velocity on the cylinder.
one. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean all of the hydraulic elements concerned in advance of set up of the electrical power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which need to also be clean and free of impurities. N46 hydraulic oil is recommended.
four. The electrical power unit ought to be mounted horizontally.
5. Check the oil level from the tank immediately after the first working with the energy unit.
six. Oil shifting is required soon after the first a hundred operation hrs, afterwards after every single 3000 hours.
DUMP TRAILER Energy UNIT- SINGLE ACTING
This power unit includes a energy up gravity down circuit. Start the motor to lengthen the cylinder and activate the solenoid valve to retract the circuit. Guide override to solenoid valve is usually provided if expected. Also a strain compen sated movement handle can be added for the circuit to control the descent pace of your cylinder.
Remark: Please seek advice from our income engineer for the unique pump displacement, motor electrical power or tank capability.
one. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean all of the hydraulic components concerned just before set up of the electrical power unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst,which must also be clean and no cost of impurities.N46 hydraulic oil is advisable.
4. The energy unit should be mounted horizontally.
5. Check the oil degree from the tank soon after the initial running of the power unit.
6. Oil transforming is needed immediately after the preliminary a hundred operation hrs, afterwards the moment every 3000 hours.