Material Handling Energy UNIT 1
Standard Description
This power unit is designed for the fork lift industry, consisting of hugely productive gear pump, DC motor, guide raise and reduced valve, tank, ect. The up and down motion are managed by the lever of the guide release valve, that is outfitted with an electrical switch to activate the motor. The lowing speed is managed through the pressure compensated movement management valve.
Unique Notes
1. The duty of this electrical power unit is S3, i.e. 30 seconds on and 270 senconds off.
two. Clean each of the hydraulic components concerned prior to set up of the power unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst, which need to also be clean and no cost of impurities, N46 hydraulic oil is advised .
four. Oil changing is needed following the original one hundred operation hours, afterwards as soon as each and every 3000 hours.
five. The electrical power unit shown is made to be mounted horizontally.

Material Managing Energy UNIT 2
Common Description
This electrical power unit characteristics power up gravity down circuit. Activate the commence solenoid to start out the motor to lift the machine. The lowing movement is activated through the solenoid valve with the lowering pace managed through the pressure compensated flow manage valve. Solutions of this series can be extensively utilized in the business of logistic devices which include fork lift, mini lift table, and so on.
Exclusive Notes
one. The duty of this electrical power unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean all of the hydraulic components concerned before mounting the energy unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst,which really should also be clean and absolutely free of impurities, N46 hydraulic oil is advisable .
4. Oil altering is required just after the first one hundred operation hours,afterwards when every single 3000 hrs.
5. The energy unit really should be mounted horizontally.