Fan Engine, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, removed from unused 18” or 24” China Air Compressor diameter TPI fans. Designed to run an 18” or 24” enthusiast blade (blade NOT included).
This motor has a (detached) cord with electric fan motor china grounded plug, motor capacitor and a 3-speed control switch. All of the wiring between your electric electric motor, capacitor and quickness control switch is still installed nevertheless the cord itself is generally detached as observed in the photos. (Discover “Control Notice” below for modify type.)
T (See “Application Notice” below for make use of in various other applications.)
Dimensions: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is certainly½” (0.500″) diameter x 2 ½” lengthy with a collection screw easy. There are (4) threaded mounting lugs on the front of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and to become on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to the next).
Rate: The approximate engine speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electrical motor) is Clockwise.

Control Take note: Motors may come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH versions in the images). Both of these types of switches both control the engine just as (but you possess a rotating knob and you possess a pull-chain). In the event that you order several engine at the same time, we will do our best to supply your purchase with each one kind of control or the excess.
Application Note: USUALLY DO NOT use this electric motor in a nonfan application. This is a completely enclosed fan electric engine and made to have continuous ventilation over the motor casing for cooling. The housing isn’t vented and the electric motor will overheat and enter automated thermal overload if run in a nonfan system where there isn’t solid ventilation past the motor. (Caution Note: the electrical motor will restart instantly when it cools cool off.) Using this electrical motor for applications apart from 18 & 24″ TPI fans could also overload the motor and lead it to proceed into automatic thermal overload. (Your lover blade from another producer may possess a steeper blade position.)
Origin: This electric electric motor is produced in China.