The EP Greenhouse gear reducer is a concise and lightweight reduction gearbox with a limit switch system that’s suitable for assembly of a locally available electric engine. The gearbox can be used in manually-controlled or climate-managed ventilation and display screen systems in greenhouses. The quick and easy-to-install EP gear reducer is usually rainproof and windproof. The reducer includes a high protection class (IP65) and can be utilized within an ambient temperature of 0-60 °C.
The low-noise gear reducer for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminum precision housing. The self-braking worm wheel transmission means that the drive shaft is certainly locked when the reduction reducer is not running. The completely sealed reduction gear motor comes with an growth chamber with a diaphragm to keep carefully the gear essential oil at a low pressure under all situations, even at high temperature ranges. Thanks to the use of an growth chamber, the geared motor can be installed in any position. There are no restrictions, since there is no dependence on a bleed plug. The sealed reduction geared motor keeps the gear essential oil of the gearbox in optimum condition for its entire operating life time. The gear driver is suitable for discontinuous use, operating class s3-30%, with a maximum activation period of 25 minutes.
The Gear box reduction reducer comes with an FT85 motor assembly flange, to which the right IEC standard motor can simply be installed (EN 50347).
The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit switch system is installed within an built-in chamber and can be enclosed by an impact-resistant plastic-type material cover. The limit change system is obtainable and easy to adjust. The limit change system’s maximum switching range is 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The reducer has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The gear driver for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.
Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of app of 4-pole electric motor.
Protection class IP65.
May be used in ambient temps of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, maximum activation time 25 mins.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC regular motor (EN 50347).
Maximum switching selection of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).