Single and double reduction planetary equipment drives to be utilized with electric, hydraulic, atmosphere motors or mechanical power input from high quickness, low torque sources to deliver reduced speeds at increased torques. The input aspect has standard SAE pads for engine mounting. Obtainable in the three output configurations demonstrated below. Many units could be furnished with an intrinsic parking brake.
Solitary reduction drives are limited by 3500 RPM input; double reduction drives to 5000 RPM. Units with integral parking input swiftness is bound to 2500 RPM.The same torque is hydraulic planetary drive available in either direction of rotation. Torque rankings are intermittent. For continuous operation reduce torque rankings to about 1/3 to 1/2 the values shown. Units provide 95% power tranny efficiency.

Wheel Drive
Input side has regular SAE pads and splined input. Output aspect has hub for installation automobile wheel. Free wheel can be done by using the springtime disconnect to disengage the drive shaft. The disengage feature is definitely regular on all wheel drives.

Shaft Output
Input side standard SAE pads with splined input. Output side choices include: Keyed circular, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is standard SAE pads with splined input. Output side has a flanged spindle for coupling to the strain.

Swing Drives
Ever-Power model 6 emerges with or without essential parking brakes. The “SW” Power Wheel has extra-huge tapered roller bearings, a ductile iron hub and warmth treated ring gear to minimize backlash growth due to wear. The external bearing nut provides the ultimate in shaft retention and shaft power. Output could be a spindle shaft or different sizes of integral pinion gears.