We are committed to research and Pto Adapter china expansion of items that meet up with the increasingly sophisticated electronics industry and so are trusted in computers, home appliances, consumer electronics, communications, info, industry, medical and other fields.
We also offers patent for 360 level AC PIN interchangeable type adaptor in fact it is leading the world’s special design.

Ever-Power provides products which are smaller, lighter, more electric power efficient, and much easier to use.
We selling products around the globe and get the certifications for each of country. And also acquired ISO9001:2015 and ISO 14001:2015 etc. to make sure products meet the latest regulations.
Gear adapters mount between the vehicle transmission and power take-away, and can serve several purposes. Most commonly, adapters are applied to change the route of rotation of the PTO productivity shaft. They can even be employed to space the PTO out and from the transmission circumstance. On some imported or non-SAE common transmissions they enable the mounting of regular 6-bolt ability take-offs. Gear Adapters can be found to match most popular transmissions.
Several body configurations: Can relocate the PTO output shaft to boost clearance for a driveshaft or direct-coupled pump
Improvements PTO shaft rotation: Fits PTO rotation compared to that of the driven equipment
Standard and non-standard bolt patterns: Matches SAE standard PTOs to nonstandard transmissions

• Frame constructed of 1/4″, 3′ x 3″ and 1/4″, 2″ x 2″ steel tubing
• Operates off of skid steer hydraulics
• Requires a minimum of 16 GPM; maximum of 22 GPM (creates 20 to 40 HP from the power take off)
• You don’t need to modify vitality take off shafts
• Adjustable lower arms
• Reinforced durable universal mounting brackets
• Complete with motor, hydraulic hoses and flat faced couplers
• Ideal for three point power take off tools – snow blowers, mowers, tillers, post hole augers, etc

: Over-running clutches provide a safe methods to protect operators and high-priced machinery from conditions when the inertia of PTO influenced apply exceeds and over-operates the tractor PTO acceleration. When this happens, the over-working coupler will free-wheel
smoothly and safely. Over-running clutches will normally endure applications needing up to 65 h.p. at 540 rpm and 100 h.p. at
1000 rpm. Extreme shock loads or drive line angularity will reduce this capability
If the space of your PTO will not fit flawlessly within a tractor, a PTO adapter can extend the size and never have to replace it for a new one. This adapter has an overall amount of 7-3/16″ with a male end 1-3/8″ x 6 spline and a female 1-3/8″ x 6 spline end.
Create additional duration on the end of your PTO. This tractor PTO shaft adapter provides both a lady 6 spline end and a man 6 spline end, each end has a diameter of 1-3/8 in. This enables more connection options and is ideal for anyone that owns a mature tractor because the older parts may not be produced any longer and so are less common.
The over-running coupler can be an essential part of PTO drive on rotary mowers, bailers, hay conditioners or any implement where inertia of driven unit may be required to over-run generating source. The coupler drives solidly from tractor to apply and free wheels easily when apply exceeds tractor PTO speeds. All measurements are nominal.
Converts a 1 1/8″ keyed spline to a 1 3/8″ 6 spline.
Necessary with 1000 RPM gearcase upgrade or 3 Point Hitch package for the 25PTOC.
This Small 1000 (21 Spline) to 540 PTO Adapter may be the perfect meet for your Shop Dog. It really is conveniently carried in the Shop Dog’s hitchpin and PTO adapter carriers.
This is also a good PTO adapter for tractor use. This adapter minimizes the tractor’s PTO from 1-3/8″ x 21 spline to 1-3/8 6 spline (540) and extends the PTO shaft 4-1/8″. It comes with an overall length of 6-3/8″ and is ranked for tractors up to 70 HP.