Our direct supply chain to Martin Sprockets factories gets a wider range of QD Bushings delivered at the proper time at the proper price.
Taper bushing are trusted as well as sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are made of high quality engineered materials with great tolerance. The feature is easy to make use of and needs no extra alteration. These bushings can match almost all sorts of assemblies and sizes. They are the best choice in style for mechanical connections.
No costly re-boring: complete range of both metric and imperial obtainable.
Standard range matches up to 125mm/5″ shafts & Hub diameter required depends on the application.
Complete short reach range offered, for qd bushing china Compact lightweight assemblies & Clean, Compact Design.
Simple installation and removal.

Our direct supply chain to Martin Sprockets factories gets a wider selection of QD Bushings delivered at the proper time at the right price.
Taper bushing are trusted as well as sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are made of high quality engineered components with great tolerance. The feature is usually easy to make use of and needs no additional alteration. These bushings can suit almost all kinds of assemblies and sizes. They are the best choice in style for mechanical connections.
No costly re-boring: full range of both metric and imperial obtainable.
Standard range suits up to 125mm/5″ shafts & Hub diameter required depends upon the application.
Complete brief reach range obtainable, for compact light-weight assemblies & Clean, Compact Design.
Ease of installation and removal.
The initial sheave and pulley installation program developed to facilitate installation and replacement of components.
The QD (Quick Detachable) design offers both conventional (flange outboard) and reverse (flange inboard) installation configurations.
1. Be sure the tapered cone surfaces of the bushing and the within of the driven product are clean and free from anti-seize lubricants.
2. Slide QD bushing on shaft, flange end 1st. Assemble key.
3. Position QD bushing on shaft. Tighten arranged screw over key “hand tight” with standard Allen wrench only. Do not use excessive force.
4. Slide huge end of sheave or sprocket taper bore into position over cone aligning drilled bolt holes in sheave or sprocket with tapped holes in flange of bushing. Assemble pull-up bolts and lock washers.
Take note: Install M thru S bushings in the hub so that both extra holes in the hub are located as far as possible from the bushing’s saw cut.
5. Tighten pull-up bolts alternately and evenly to tightness indicated in torque table on back. Usually do not use extensions on wrench handles. There must be a gap between your face of the sheave or sprocket hub and the flange of the QD bushing to insure a satisfactory cone hold and press fit.
CAUTION: THIS GAP MUST NOT BE CLOSED.
Use a tapered or QD bushing from Ever-Power with sheaves, pulleys, sprockets and several other power transmitting applications. Flanged quick-disconnect bushings feature a completely split design to help provide easy set up and disassembly. A tapered bushing with straight edges uses an interior screw to help drive the bushing into the shaft, while a split taper includes a flange and a key on the bushing to help provide more drive.
QD bushings (inch and metric sizes) possess a flanged design and feature a 4° taper with conventional or reverse installation. They are stocked in well-known completed bore sizes and minimum plain bore for customized reboring.
Many people make reference to both types as a “taper lock” because they both utilize the tapered wedging action to lock to the shaft. The taper bushing, with it’s straight sides, uses a set screw to drive the bushing into the bore of the component getting set up (sheave, sprocket, etc.). Be careful when installing these screws. The holes with threads on the bushing are for removal only. Also remember that the appearance of a flange on the outside of the bushing doesn’t indicate it’s a QD style. Split Taper bushing also has a flange, and both are not interchangeable. The QD design includes a split that proceeds through the flange. The Metal QD (Quick Disconnect) Type bushing offers flexible and easy installation while providing exceptional holding power. QD Bushings are used thought out the industry offering convenience and design versatility. They are precision machined of quality Metal and are set up by tightening a number of cap screws. This draws the bushing into the taper bore of the product which compresses the bore of the bushing. QD bushings are easily removed utilizing the cap screws as jack-screws. Dual drilled holes are furnished in QD Bushings permitting installation of product in the traditional or reverse positions. This enables cap screws to end up being installed through product hub or bushing flange whichever is definitely most convenient. A substantial benefit in installation, cap screws are usually inserted from the exterior where they are easily accessible. QD Bushings are available from share with all popular bores within the number of each size bushing.
QD Bushings feature a split tapered flange with the split central to the flange and taper. They are applied to sprockets, sheaves, and pulleys where more clamping push is necessary over standard bored-to-size bushings. Quick-Disconnect Bushings are crucial for installation v-belt drives, synchronous belt drives and roller chain drives.