All EPT shaft collars, including quick-Shaft Clamp clamping collars, are single point faced to ensure perpendicularity and proper alignment. This critical manufacturing stage assures precise shaft collar face to bore relationship resulting in correct element positioning on the shaft and actually pressure on interfaced parts.
Quick-clamping shaft collars from EPT are made of high quality aluminum with type-II sulfuric anodized finishes, with a dark-colored finish about the collar and a gold finish upon the clamping lever for added visibility. Lightweight aluminum collars are corrosion resistant, lighter than additional metals, possess low inertia and also have non-magnetic properties. All EPT items are RoHS and REACH compliant. Available typical sizes for the quick-clamping shaft collars will be 0.375” to at least one 1.5” in the inches series and 8 mm to 38 mm in the metric series.
Shaft Collar, System of Measurement Inch, Shaft Locking Type – Couplings 1 Piece Quick Clamp, Bore Type – Collars Plain Bore, Bore Dia. 3/8 In., Material – Collars Black Anodized 6061 Aluminum, Outdoor Dia. 1-1/2 In., Width .394 In., Clearance Dia. 1.496 In., Screw Size M3, Screw Material 18-8 300 Series Stainless Steel, Operating Temp. Range -40 Degrees to 200 Degrees F, Requirements RoHS2 Compliant, REACH Compliant
The Shaft Collar 1×3/8, 1/2″ for Key Shaft is constructed of lightweight Aluminum, both piece design allows you to install these collars anywhere on a shaft without removing components. In addition to reducing the entire weight, the flats let you rotate a shaft without marring or gouging the shaft. Merely place the collar on the shaft and tighten both socket-head cap screws to safeguarded the collar and a wrench and become added to the collar’s flats to rotate the complete shaft/collar assembly.
Made of lightweight Aluminum
Enables you to install these collars anywhere on a shaft without removing components
Easily place the collar in the shaft and tighten both socket-head cap screws to secure the collar
Flats let you rotate a shaft without marring
Climax Part C-056-S Establish Screw Collar is made with T303 STAINLESS, which works well in corrosive environments. Measurements happen to be 9/16 in. Bore, 1 in. OD, 7/16 in. Width. It really is powerful on hard and smooth shafts. It is a Affordable collar design, and Easily installed where main disassembly would or else be required.
EPT speedy clamping shaft collars collar clamp hinge acquire manufacturing 2 1 8 in metal,shaft collar clamp power manufacturing steel vex clamping design,vex clamping shaft collar collars 1 part with lever clamp hinge,vex clamping shaft collar clamp 3d model developing quick 1 3 8 in alum,EPT speedy clamping shaft collars collar clamp 2pc 1 in steel stainless split with lever,climax metallic s shaft collar two part clamp style EPT speedy clamping collars 2laptop or computer 1 in steel power,clamp in shaft collars couplings universal clamping collar design with mounting holes 2pc 1 in steel,shaft collar clamp drive clamping calculation quick hook up collars at best price in,clamp shaft collar clamping collars drive calculation quick connect,stainless steel twice split shaft collar with quick clamping clamp hinge power calculation.
Black Oxide Plated Steel One-Piece Clamping Collar.
Recessed Screw Head has an outside surface free from key projections for safety.
Design totally engages the shaft without marring.
Greater axial holding ability than set screw collars.
Effective on hard & very soft shafts.
Indefinitely adjustable and easy to remove, one-piece clamping collars are typically used on hard or smooth standard round shafts, more than a split hub or in thin wall tube. By using friction to provide superior grip on bars and shafts, sole split collars present sturdier, more dependable results when compared to the set screw style of solid collars. In addition they offer tremendous axial electrical power, while minimizing shaft distortion for excellent performance and decreased deterioration.

The collar clamping mechanism works quickly and successfully with simple hand opening of the integral clamping lever, positioning the collar on the shaft, and closing the lever flush with the outer surface area of the collar. The look of the cam on the lever and the mating machined surface on the collar assure a good fit with a optimum axial load of 35 to 120 lbs / 133 to 489 N according to the collar bore size. In scenarios where higher holding electrical power is definitely or clamp axial load is required, the quick-clamping collar is not the recommended decision. EPT offers a accomplish line of industry-leading one-piece and two-part shaft collars designed for these applications.