Small Precison Worm Reduction Gearboxes
There are numerous of specifications you will have to consider when making a worm gearbox selection.
First, what’s the input and output torque requirements? Next, verify vendor horsepower/torque charts and pick the correct worm equipment reducer.
If the size of the gearbox will likely be an important consideration then check the reducer dimension specs, not all manufacturers make compact units. Actually, working with the right supplier will help you not merely find the right equipment reducer but also prevent some of the most common mistakes in reducer selection. We provide a free guide to assist you find the appropriate supplier to work with.
For low and fractional horsepower application you can expect two sizes of worm equipment reducer, the SW-1 and the SW-5. Size and torque output are the major distinctions between both of these models. Both feature the hollow or solid result shaft. Both models are compact and provide users a wide variety of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specs of your unique application or project is essential to selecting the correct worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Little precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped mounting holes on top and bottom
• Flush fitting bearing caps easy to install
• Input shafts installed on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capability of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Right Angle Worm Gear Motors Used
Anywhere a concise dual shaft gear motor or single shaft gear motor is required. This right angle gear motor is indeed versatile it can work just about anywhere.
Features & Options
Double Shaft or One Shaft
Hollow Shaft
Maximize Torque in a Small Package
Wide Gear Ratio
Cost-Effective
Compact Size
Specifications
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using miniature gears, Ever-Power offers designed and built exclusive, high accuracy mini gearboxes that cannot be found somewhere else. Our miniature gearboxes are available in numerous configurations, which includes worm and wheel, cross axis helical, bevel, inline spur, and more. We are able to also provide custom micro gearboxes that were created and created to meet your specific specifications.
Contact us for the mini gearbox your application requires, or demand a quote on a customized micro gearbox.
Micro Gearbox Options
Gearboxes are also known as reducers, gear reducers, swiftness reducers, gear drives, and gearmotors. All conditions can be used pretty much interchangeably. Please be aware that the links for our little gear drives include details on the full range of framework sizes for that series or design.
Bevel Box Micro Equipment Drive
Our bevel container miniature gear drives are program rated for the the best balance of functionality and cost. Torque can be balanced to meet up your RPM and working life requirements. Lightweight with low backlash overall performance (as little as 1°, with choice of 1/2”).
Result torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input boosts to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power miniature cross axis helical gearboxes provide relatively high levels of thrust in a concise package. They provide an result shaft at 90° from the input, and so are obtainable in gear ratios from 1:1 to 40:1. Lightweight but durable, with machined aluminium housings and hardened alloy metal gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: only ≤30 arc minutes
Rated for input boosts to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc moments of backlash or better. Also known as “shaft to bore gearboxes,” the unit provide a single input shaft that protrudes from opposite sides of the casing; output is definitely a keyed bore. Standard one- and double-end shafts can be found and given keys and retainer bands. An array of gear ratios and insight sizes can be found to meet your needs.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Available in ratios from 5:1 to 120:1
Rated for input boosts to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened steel gears, solid aluminium housings, and long term lubrication. They offer two input shafts on opposing sides of the framework, with two result shafts perpendicular to the insight shafts. Our mini 4 shaft worm equipment drives deliver high effectiveness efficiency with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: less than ≈2°
Available with equipment ratios from 1:1 to 32:1
Rated for input speeds up to 4,000 RPM
Miniature Flange Worm Equipment Drive
These micro flange worm gearboxes produce an output at 90° from the input. They deliver superior performance in a wide variety applications and are constructed with little footprints, making them ideal for operations where space is limited. They offer high performance with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: as low as ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specially engineered for small worm gearbox encoder applications, Ever-Power’ micro inline spur gear drives are available in two frame sizes, and so are rated for speeds up to 3,000 RPM. Aluminium housings and stainless gears and shafts make these inline spur gearboxes difficult and corrosion resistant, for your most demanding applications.
Result torque: up to 125 oz.-inches
Low backlash: less than 15 arc minutes
Available with equipment ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature correct angle worm equipment reducers deliver excellent performance with high efficiency, and show rugged construction for challenging power transfer functions. Available in three equipment ratios (5:1, 10:1, 20:1), our small worm gearboxes are designed in extremely small footprints for applications where space is bound.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Compact footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power may engineer and manufacture a custom miniature gearbox to meet your unique specs. We can produce custom micro gearboxes in any configuration the application requires, with output torque levels as high as 900Nm. We are able to work from your own gearbox styles, reverse engineer an existing unit, or assist you to develop an all-new design that provides the performance you will need. Ask for a quote on a custom made miniature gearbox or e mail us to discuss your specific requirements.
The Ever-Power Advantage: Small is No Big Problem
Broadest collection of small gear reducers
Greased for life
Ruggedly built
Modifications and particular ratios available
Custom small gearboxes designed to suit
Input & Output Shafts
Input and output shafts with drive key and retainer rings could be supplied to your specs for any of our hollow bore miniature gearboxes. We provide a basic selection of solitary ended or dual ended shafts to put together in these gearboxes. All gearbox shafts are supplied with keys and retainer rings.
For P and PF series worm and wheel gearboxes make use of our P/PF gearbox shafts.
For Electronic series crossed axis helical gearboxes use our Electronic gearbox shafts.
For F series spur gearboxes, contact our app engineers to discuss your particular needs.
We provide a broad selection of misalignment shaft couplings in in . and metric bore sizes. ” and metric precision floor shafts are available from stock.
Contact Us for High Performance Miniature Gearboxes
We are the miniature gearbox experts. All of our micro gear drive models deliver superior performance in a little footprint, and are rugged enough for challenging function environments. E mail us to find out more about our mini gearboxes, or request a quote on a custom model that is tailored to your needs.
Additional advantages of worm drive gearboxes include: