Use a tapered or QD bushing from Ever-Power with sheaves, pulleys, sprockets and many other power transmission applications. Flanged quick-disconnect bushings include a completely split design to help provide easy set up and disassembly. A tapered bushing with straight edges uses an internal screw to help drive the bushing into the shaft, while a split taper has a flange and a key on the bushing to greatly help provide more drive.
L – Space required to tighten bushing or loosen to eliminate hub with puller using brief hex key.
M – Space required to remove bushing using screws as jackscrews – short hex key – no puller reuired.
Listed needed hub diameter is usually for reference only. Severe conditions may require bigger hub and in some cases a slightly smaller hub could be satisfactory. Inquire about particular application.
We are able to also supply particular bushings manufactured from other machinable materials. Please inquire
External key of all sizes for positive drive and higher torque carrying capabilities
Double-split barrel for positive clamping
Solid flange to keep concentric bores
Available in inch, metric, and spline bores. Bore range from 3/8″ to 10″
Gates Taper-Lock bushings are used to mount pulleys, sprockets and sheaves on shafts. The durable stainless steel construction is perfect for meals and beverage applications or where non-corrosive sprockets are had a need to prevent rust.
This Taper-Lock bushing is ideal for use with same-type sheaves, sprockets, and pulleys in power transmission applications that want synchronous rotation. The carbon metal bushing provides strength and resistance to wear and includes installation bolts and washers. Taper-Lock sheaves, sprockets, and pulleys (not really included) can be found in a variety of outside diameters to fit this Taper-Lock bushing, permitting the complete selection of the amount of drive tooth or grooves. This bushing is suitable for use in an array of mechanical and digital adjustable drives, including automotive and printing industries.

Plain bearings provide low-friction sliding contact for relative motion between parts of a machine. They will be the simplest kind of bearing, without rolling components, and there are three simple types of basic bearings: radial simple bearings (also known as sleeve bearings or bushings) to support rotating or reciprocating shafts, thrust bearings (also called washers) to support axial loads on shafts, and linear bearings to aid and guide the movement of parts in a directly range. Flanged sleeve bearings have a flange on one end to support axial loads. Spherical plain bearings are radial bearings that enable angular misalignment of the shaft. Basic bearings are made from durable, low-friction components such as for example sintered or cast bronze alloys, plastic-type material, or a combination of a metallic shell and a plastic-type material bearing surface. They could be lubricated externally or by a lubricant embedded in the bearing material. Plain bearings are found in automobiles, construction and mining gear, textile manufacturing devices, and robotics, among others.
The maximum bore comes with a typical ANSI/AGMA 9002-B04 or ISO 286-2 keyway.
Taper Lock Bushing installation screws can be either in . (UNC) or metric (BSW) and care ought to be taken to choose the proper hub part number.
Taper Lock Busings are a product of Baldor Dodge and so are not included with Lovejoy coupling hubs.
Maximum bores size and torque capacities are per Dodge specifications and Lovejoy is not responsible for the accuracy of the values listed in accordance with bore size and torque capacity.
Split Taper Bushings. Split-taper bushings are used to mount sprockets, pulleys, and couplings onto shafts. They have a tapered, split body that locks the bushing down onto the shaft, prevents it from slipping during procedure, and transfers more torque.
All reborable bushings are stocked
without sawsplit to facilitatere-machining.
Sawsplit must be manufactured in bushing to allow it to compress for proper gripping of the shaft.
Adapters for TAPER-LOCK bushings are recommended for use where it is far more convenient to straight bore than to drill, tap and taper bore hubs to accommodate bushings. The adapter is definitely a gray iron, taper-bored sleeve whichfits into the directly bore of a hub. The bushing simply fits inside the adapter which is tapped for the bushing screws. When tightening the locking screws, adapter is extended against the hub bore contracting the bushing tightly upon the shaft.
Ever-Power offers an comprehensive selection of energy absorbing elastomeric isolators that limit the tranny of Taper Bore Bushing structure-borne vibration and impacts. Our items are made for simple use and a wide variety of orientations in compression, shear and slanted angle loading. While economical, the products are made from quality rubber, silicone, Neoprene and steel components that enable support for the right quantity of load for each software. Filter through our in-depth product report on elastomeric products including base mounts, cup mounts, bumpers, bushings and grommets to find the right alternative for your application.
Use a tapered or QD bushing from Ever-Power with sheaves, pulleys, sprockets and several other power tranny applications. Flanged quick-disconnect bushings feature a completely split design to greatly help provide easy installation and disassembly. A tapered bushing with directly edges uses an internal screw to greatly help drive the bushing in to the shaft, while a split taper has a flange and an integral on the bushing to help provide more drive.
L – Space required to tighten bushing or loosen to remove hub with puller using short hex key.
M – Space required to remove bushing using screws as jackscrews – short hex key – no puller reuired.
Listed needed hub diameter is definitely for reference only. Severe conditions may necessitate bigger hub and in some cases a slightly smaller hub may be satisfactory. Inquire about particular application.
We can also supply particular bushings manufactured from other machinable components. Please inquire
External key on most sizes for positive drive and greater torque carrying capabilities
Double-split barrel for positive clamping
Solid flange to keep concentric bores
Available in “, metric, and spline bores. Bore range between 3/8″ to 10”
Gates Taper-Lock bushings are used to mount pulleys, sprockets and sheaves on shafts. The durable stainless steel construction is ideal for meals and beverage applications or where non-corrosive sprockets are needed to prevent rust.
This Taper-Lock bushing is ideal for use with same-type sheaves, sprockets, and pulleys in power transmission applications that require synchronous rotation. The carbon steel bushing provides strength and resistance to wear and includes mounting bolts and washers. Taper-Lock sheaves, sprockets, and pulleys (not included) can be found in a variety of outside diameters to match this Taper-Lock bushing, permitting the precise selection of the number of drive tooth or grooves. This bushing is usually suitable for use in an array of mechanical and digital adjustable drives, including automotive and printing industries.