Worm drive gearbox with motor
A robust worm-drive gearbox powered by an MM28 electric motor. Ideal applications where a simple to match, high torque output is required. Great for student based projects which includes robots and buggies.
The machine has been designed to ensure that the output shaft could be ‘clicked’ in and out for modification. E.g. reducing to size. The motor is snap fitted into its cradle to engage the apparatus and worm.
Details
1 – 6V DC
0.1A to 1A depending on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + engine: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the engine is not turning. The high equipment ratios of 216:1 or 336:1 make this gearbox appropriate for small strolling robots, lifting mechanisms, and additional applications where high torque is definitely desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draft to a few amps, making them ideal applicants for the DRV8833 motor driver carrier. Engine overheating can be due to excessive stalling, even at very low voltages. We advise that you use stall-detection sensors, or just view your robot, to make sure that it doesn’t stall for lots of seconds at a time.
This gearbox has a 4 mm diameter, round output shaft, which works together with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also suits on small threaded end of the shaft, though it is not specifically designed to work with this type of shaft (the hub’s set screw could damage the thread on the shaft).
Ever-Power gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right angle worm geared motors arranged new standards for reliability, efficiency and economy with unparalleled features including hollow shafts in the smallest sizes. An inverter friendly style provides for easy integration today and a really future proof answer. The Ever-Power gear motor offers total flexibility in mounting choices includes shaft, base, encounter, and flange solutions. The electric motor terminal box could be mounted in choice positions rotated in 90º steps around the engine frame providing for unparalleled integration options.
Ever-Power gear motors comply with North American and International requirements, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a genuine total alternative for our global clients.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose proof,and can be used outside or in wet and dusty conditions without the usage of additional enclosures. Complete rated output is offered by the output shaft of the unit.
Product Features
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Additional features:
Connecting with Connect connectors.
With integrated inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the remedy for applications requiring a part turn, optional dual output, or an inability for the engine to be back again driven. The DC correct angle gear motors are designed for continuous and intermittent duty procedure. Our right angle gear reducers are designed with several mounting plate options, making them well suited for a number of DC engine based applications. We offer 12 ratios ranging from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ hours (varies by application)
EP Products Worm Equipment Motors are designed to generate high torque in a small package size. Worm Equipment Motors are great for applications that require a personal- locking or breaking feature since the result shaft can’t rotate when there’s no power applied. Additionally, Worm Gearheads can transfer motion in 90 degrees. With various reduction ratios, precision cut gears, voltages and sizes, EP Products includes a DC Worm Equipment Motor solution for the application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Gear Decrease Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Security Door Locks / Industrial Conveying Systems / Security Gates / Dental Chairs / Ambulance Cots & Stretchers Many of our DC Motors can be complimented with among our Worm Gearheads. EP Items will work with you to create and manufacture a Worm Gear Engine which will optimize the performance of your specific application.
Built to your specific requirements
Electric motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Cut / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, worm motor connectors, etc.)
INTRODUCTION
The turbo metal gear worm electric motor uses a metal gear box for sturdiness and a higher torque output. Due to the special mechanical framework of the worm drive the motor output shaft can be self locking and will not be rotated.
This part uses a two wire connection and supports direction control in addition to PWM speed control. Rated voltage is 12v and will accomplish 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear devices from EP DRIVESYSTEMS especially show their strength in applications where high equipment ratios are necessary. Our worm geared motors are as a result optimally suited for make use of in intralogistics, packaging technology and the food & beverage industry.
Four great reasons for EP worm geared motors:
Rugged
Our worm geared motors have a high overload capacity
Maintenance Friendly
Washdown versions allow simple and efficient cleaning of the drive program.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Flexibility
Our modular design give users maximum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are many applications that want drive systems, and each of these has its own unique requirements. The EP series worm gear motors can be quickly and efficiently adapted to satisfy your needs.
Worm gear units impress with their high power density and compact style. If required, we can also supply them with the highly effective nsd tupH surface treatment.
In addition to the basic EP housing, we offer an extensive type of bolt-on components to customize the merchandise including torque arms, shaft covers and output flanges. These could be easily field installed, but we will also be glad to assemble the individual components for you.
Find out more about the modular SI worm geared motors!
Find out more
Easy and Clean: The EP worm gear unit SMI
SMI worm gear units feature a smooth, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface area conversion makes the product ideally suited for harsh and challenging industries like food processing and pharmaceuticals.
Versatile input designs such as NEMA, IEC or direct motor mounts in additional foot or flange mounted housing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared engine program. The units possess on all sides different repairing possibilities and enable a simple assembling for the client.
Various other drive configurationscan be created by use of built-on components (e.g. torque arm and output flanges). The housings are made in light weight structure out of aluminium die cast. Electric motor attachment is realised generally by way of IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:output shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm
Purchase Worm Drive Gearbox with Engine – incorporating the following features: 1 to 6V voltage rating, 17100 rpm simply no load acceleration, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm wide, 40mm high, a robust worm drive gearbox powered by an MM28 engine (included), most ideal for applications where an easy to match, high torque output is required, nylon housing and gear, requires light essential oil or silicon grease lubrication, perfect for student based projects including robots and buggies.
Most suitable for applications where an easy to match, high torque output is required
Perfect for student based projects including robots and buggies
Reversible High torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Reversible High torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Features:
The engine is Gear DC engine with micro-turbine worm, you can transform the wiring-connection to improve motor rotation.
Turbo worm geared engine with self-lock, that’s, regarding motor without electrical, the output axis is definitely fixed, self-lock.
The reducer output shaft arranged vertically with the motor shaft, whole motor output shaft relatively-short than general gear engine, widely used to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the windowpane, door, Mini winch. Ect.
In sumo robot or combat robot competition where high holding torque’s motor is essential in order to avoid your robot being pushed by your opponent robot. The worm gear is definitely a better option when compared to spur gear motor. How come worm gear so unique? Check this wiki out: Worm Drive.
“Unlike with ordinary equipment trains, the path of transmission (input shaft vs result shaft) is not reversible when using large reduction ratios, due to the greater friction involved between the worm and worm-wheel, when usually an individual start (one spiral) worm is used. This can be an advantage when it is desired to get rid of any likelihood of the output driving the input.”
In other terms, it is tough to push your load (example, your robot) if the motor is not power or rotate.
Features and Spec:
Metal gear box
Output shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g