TF Type Flanges
Model TF flanges are made from the exact same high-strength cast iron as the S flanges, but are designed to accommodate the global standard Taper Lock bushing for straightforward installation and removal
TF Form flanges enable for mounting the bushing on the front (hub) side in the flange
TF flanges can be found in sizes six by way of sixteen and might be applied with any style of sleeve as pictured on page SF-5
TR Style Flanges
TR flanges are very similar towards the TF style, but enable for the Taper Lock Bushing to become mounted and eliminated from
the reverse or serration side on the flange
The constrained torque ratings with the Taper Lock Bushings allow TR flanges to only be utilised with EPDM or Neoprene sleeves
Diverse bushing sizes are applied, so they’ve got unique optimum bores compared to the TF flanges
Sizes 6 by means of sixteen can be found
Taper-Lock Bushings
The market standard taper lock bushing is really a split style allowing a compression fit of the flange to your shaft without set screws
The basic style and design can make the installation and removal simple while the 8° taper grips tight and supplies fantastic concentricity
A Diminished level of inventory may be accomplished due to the many other energy transmission parts that use Taper Lock Bushings such as: sheaves, sprockets, and pulleys
doesn’t offer the Taper-Lock Bushings themselves as they’re extensively readily available from other manufacturers